Matek RGB LED & Buzzer Board

Description

Matek RGB LED & Buzzer Board
The Matek WS2812B RGB LED & Buzzer Board is a great option for a quadcopter tail light. With 6 of the tiny 5050 (5mm x 5mm) smart RGB LEDs on a PCB with mounting holes and a chainable design. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC (4-7V works) and you’re ready to rock. The addition of a buzzer allows you to easily locate your craft, and other audible alerts from your flight controller, or any 5VDC input. The LEDs are ‘chainable’ by connecting the output of one stick into the input of another. There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as a Betaflight (or other) Flight Controller, Arduino project, etc. Comes as a single stick with 6 individually addressable RGB LEDs and one buzzer assembled and tested.
Matek RGB LED & Buzzer Board
The Matek WS2812B RGB LED & Buzzer Board is a great option for a quadcopter tail light. With 6 of the tiny 5050 (5mm x 5mm) smart RGB LEDs on a PCB with mounting holes and a chainable design. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC (4-7V works) and you’re ready to rock.
The addition of a buzzer allows you to easily locate your craft, and other audible alerts from your flight controller, or any 5VDC input.
The LEDs are ‘chainable’ by connecting the output of one stick into the input of another. There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as a Betaflight (or other) Flight Controller, Arduino project, etc.
Comes as a single stick with 6 individually addressable RGB LEDs and one buzzer assembled and tested.
×
Buy now and save!
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
iCharger 3010B
Power Supply to Banana Plug Cable
AC Power Cable - 3 Feet
XT60 Charge Extension
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© ProgressiveRC
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by